GM-3 high performance friction linings for koepe/ friciton winder
Category:
keyword:
GM-3 high performance friction linings for koepe/ friciton winder
- Product Details
-
1. The friction coefficient under various working conditions is greater than 0.25 (measured by China University of Mining and Technology and Luoyang Mining Machinery Engineering Design Institute as both are greater than 0.28), which fully meets the needs of multi-rope friction hoists.
2. High mechanical strength. After testing and comparison, the heat resistance, melt resistance and wear resistance are better than imported liners. It does not contain substances that damage the wire rope, and it is easy to process the rope groove on site.
3. Good compatibility with friction grease. Applicable to both imported and domestic friction greases.
4. The price is moderate. The price/performance ratio is better than that of imported liners, which can bring considerable economic benefits to users.
5. After testing and comparison, the heat resistance, melt resistance and wear are due to imported liners, and the wear at equal power is equal to that of imported liners.
Technical Parameters
serial number project unit Test Results Auxiliary 1 density g/c㎡ 1.36 2 hardness HD 70-74 GB/T2411 3 Impact strength KJ/M2 9.72 GB1843 4 Tensile Strength Mpa 19.1 GB1040 5 Bending strength Mpa 26.22 GB9341 6 Flexural modulus Mpa 920 7 Elongation at break % 10.6 GB1040 8 Compressive strength Mpa 45.6 GB1041 9 Thermal decomposition temperature ℃ 320
Related Products
Leave A Message
If you have any suggestions or feedback on our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.
E-mail: info@engineeringplastic.cn
Add:No.99, Hengshan Road, Jianxi District, Luoyang City, Henan Province, China
Copyright© CIC Luoyang Mechanical Engineering Technology Co,.LTD Powered by：www.300.cn SEO This website supports ipv6 City