Friction liner of the cableway/ropeway driving wheel

Digital rope groove cutting device

Digital rope groove cutting device is a special equipment designed and developed by our company for the cutting of mine hoist liner .The machine tool can effectively solve the problems of gnawing knife, shaking knife, low cutting accuracy, long cutting time, low efficiency, high labor intensity and so on when the old cutting equipment cuts the rope groove, and is easy to operate, safe and efficient. After the first installation and commissioning, the machine tool has a unified benchmark, which can easily achieve the consistency of cutting rope groove depth after cutting multiple rope grooves, so as to ensure the same bottom diameter of rope groove.

KMMC High-Performance Friction Lining for Kilometer Deep Shafts

KMMC High-Performance Friction Lining for Kilometer Deep Shafts is an innovative product developed to meet the special demands of deep vertical shafts and heavy-load hoisting conditions. It features high specific pressure and high friction coefficient, effectively addressing the technical challenges of multi-rope friction hoists in deep shafts.

GDM-326 Friction linings

GDM-326 high-performance friction liner compared with other liner, mainly in the coefficient of friction, pressure, wear resistance and stability, etc. have greater improvement, so it can be completely reliable. Now it has been adopted by users in large quantities, all of which have achieved good economic benefits. Imported materials high-performance friction liner can also be used in other use of friction to transfer the power of the machinery, can also be used as a ropeway cable car leading wheel friction liner.

GM-3 high performance friction linings for koepe/ friciton winder

The friction coefficient under various working conditions is greater than 0.25 (measured by China University of Mining and Technology and Luoyang Mining Machinery Engineering Design Institute as both are greater than 0.28), which fully meets the needs of multi-rope friction hoists.

Friction liner for Drive Sheave in Man riding Chairlift Systems

JB/T12185-2015 underground mine overhead cable friction pad industry standards released by the People's Republic of China Ministry of Industry and Information on April 30, 2015 was drafted by Zhongshi Luoyang Engineering Plastics Co., Ltd.

disc brake

Disc brakes use butterfly springs to generate braking force and rely on oil pressure to release the brakes. In the braking state, the positive pressure of the brake shoe against the brake disc is determined by the pressure of the working oil in the hydraulic cylinder.

Well drilling hoist

This series of products includes single-cylinder and double-cylinder models with diameters of 2.8m-3.6m. They are used for lifting materials and personnel when sinking shafts in coal mines, metal mines and non-metallic mines. They are special equipment for digging shafts in mines.

Multi-rope friction mine hoist

Mine hoists are widely used in the hoisting systems of shafts and inclined shafts in mines such as coal, non-ferrous metals, ferrous metals, non-metals, chemicals, etc. They are used to lift minerals, lift personnel, materials and equipment, etc. They are the throat of mine system equipment. It can also be used as other traction and transportation equipment.

KP-09 ultra-polymer sheave wheel insert

The hoisting Sheave inserts is mainly to prevent the wear between hoisting sheave and wire rope due to direct contact with each other. The hoisting Sheave inserts plays a very important role in protect the service life of wire rope. The wire rope may cause rotation during the operation. If the friction coefficient is too high, the rotation of the wire rope will be hindered to cause the damage to the wire rope. For this situation, the wire rope must be led into the shaft by resistance as small as possible to reduce the torque and rotation stress.

Friction liner for Full Scale Crash Test Facility

All over the world, our materials guarantee an optimal coefficient of friction between the wire rope and the sheave. Alongside the classical areas of application such as mining and funicular railways, you will find our products in cable winches, fairground rides, steel rolling mills, crash test facilities and many other applications where traction and safety matter.

KMMC High-Performance Friction Lining for Kilometer Deep Shafts

KMMC High-Performance Friction Lining for Kilometer Deep Shafts is an innovative product developed to meet the special demands of deep vertical shafts and heavy-load hoisting conditions. It features high specific pressure and high friction coefficient, effectively addressing the technical challenges of multi-rope friction hoists in deep shafts.